Cheap 🥰 Tribord Men’s Sailing Jacket 100 🧨

Ideal for several hours to a whole day of sailing. This waterproof, windproof and breathable sailing jacket has lots of pockets and a high neck: everything you need.

occasional inshore sailors. 3 to 4 half days of sailing per year in moderate rain.

WATERPROOFING

– Water-repellent coated fabric.
– Fully taped seams.
– Adjustable jacket bottom with elasticated cord
– Sleeve ends adjustable at the wrist with rip-tab strips.
– Zipper fastening protected by internal and external zipper flaps.
– Collar height (back): 4.5″
– > 5000 mm in Schmerber test (>2000 mm after 5 washes)
– Tested under a simulated moderate rain shower (26 gal/hr/sqm) for 3 hours

BREATHABILITY

RET <12: very breathable.

To find out whether a fabric is breathable, we measure its evaporative resistance, or RET, (test based on the ISO 11092 standard). It is its ability to allow the water vapor produced by the body during exercise to escape.

COMFORT

– 2-way adjustable hood.

WEIGHT

1.9 lbs. in size L

Score to compare the environmental impact of products

The environmental impact of the product is calculated over its entire lifecycle and with different indicators. An overall score (ABCDE) is attributed to help you easily identify the products with the best environmental performance by comparing products of the same type with one another (T-shirts, pants, backpacks, etc.). Decathlon chose to apply this voluntary environmental labeling scheme. For more information, visit: http://sustainability.decathlon.com/

RESISTANCE TO WEAR

– Injected plastic central zipper resistant to salt oxidation.

HOW TO REACTIVATE THE JACKET’S WATER-REPELLENCY
step 1: before washing

Close all zippers and flaps and remove any parts of the garment that cannot be washed. Also remember to loosen the straps and elastic parts and empty the pockets.
Then turn the garment inside out to wash it.

HOW TO REACTIVATE THE JACKET’S WATER-REPELLENCY
step 2: washing

You can wash your jacket on a synthetic cycle at 86°F or 104°F with your usual detergent. Do not use fabric softener, which could damage the existing performance of the garment, or bleach.

Also take care not to bend your jacket too much when you place it in the washing machine and do not overload your machine.

Very important: select a thorough rinse or double rinse to completely remove all detergent residue.

HOW TO REACTIVATE THE JACKET’S WATER-REPELLENCY
step 3: drying

Drying is a crucial phase in reactivating the water-repellent treatment.
We recommend that you lay your jacket flat on a clothes rack and leave it out to dry in the open. Caution: never dry your jacket directly on a radiator.

Then place it in the tumble dryer on a short synthetics cycle, i.e. 10 to 15 minutes, before turning it back the right way around. Caution: do not overdry the garment.

HOW TO REACTIVATE THE JACKET’S WATER-REPELLENCY

If, despite this procedure of washing and thorough rinsing followed by gentle drying in a tumble dryer, the drops of water no longer run off the surface of your jacket, we recommend that you “re-waterproof” it using a waterproofing spray sold in our stores.

Composition

Main fabric : 100.0% Polyamide
Main lining : 100.0% Polyamide
Secondary lining : 100.0% Polyester cationic

Waterproof : 3 hr under a storm shower (>2,000 mm after 5 washes). Seams. Flaps

Breathability : Very breathable coating (RET<12)

Pockets : 3 outer pockets, 1 inside pocket.

Pockets : 3 outer pockets, 1 inside pocket.

Easy to use : Jacket hem and sleeve tightening, hood inside the collar.

Environmental impact : Lifecycle comparison: Men’s waterproof jacket – sustainability.decathlon.com