Best reviews of ✔️ Tribord Men’s Sailing Jacket Offshore 900 💯

Highly waterproof and breathable sailing jacket. Offshore comfort thanks to the lightweight feel, the new single-movement adjustable double cuff system and its high collar.

Our design team has developed this sailing jacket especially for you. It will be perfect for all of your offshore adventures, in all weather conditions.

FEATURES

– 7 reflective patches to intensify low light sources
– Adjustable jacket hem
– Preformed elbows
– Double slider anti-corrosion front zipper
– Preformable collar flap at the nose that rolls to the left to stay out of your way.
– Slightly oversized so that you can wear plenty of layers underneath in cold weather.- >10,000 of water pressure after 5 washes
– 100% taped seams.

TRIBORD DOUBLE CUFF SYSTEM ADJUSTABLE IN A SINGLE MOVEMENT

For optimal waterproofing, take the time to tighten the cuffs. Also check that the inner sleeve is not caught on your watch, for example, and that it is not ruched up.

HOW TO REACTIVATE THE JACKET’S WATER-REPELLENCY step 1: BEFORE WASHING

Close all zippers and flaps and remove any parts of the garment that cannot be washed. Also remember to loosen the straps and elastic parts and empty the pockets.
Then turn the garment inside out to wash it.

HOW TO REACTIVATE THE JACKET’S WATER-REPELLENCY step 2: WASHING

You can wash your jacket on a synthetic cycle at 86°F or 104°F with your usual detergent. Do not use fabric softener, which could damage the existing performance of the garment, or bleach.

Also take care not to bend your jacket too much when you place it in the washing machine and do not overload your machine.
Using the right thermal protection based on the water temperature is essential. select a thorough rinse or double rinse to completely remove all detergent residue.

HOW TO REACTIVATE THE JACKET’S WATER-REPELLENCY
STEP 3: DRYING

Drying is a crucial phase in reactivating the water-repellent treatment.
We recommend that you lay your jacket flat on a clothes rack and leave it out to dry in the open. Caution: never dry your jacket directly on a radiator.

Then place it in the tumble dryer on a short synthetics cycle, i.e. 10 to 15 minutes, before turning it back the right way around.

HOW TO REACTIVATE THE JACKET’S WATER-REPELLENCY
FINISHING STEP

If, despite this procedure of washing and thorough rinsing followed by gentle drying in a tumble dryer, the drops of water no longer run off the surface of your jacket, we recommend that you “re-waterproof” it using a waterproofing spray sold in our stores.

Score to compare the environmental impact of products

The environmental impact of the product is calculated over its entire lifecycle and with different indicators.
An overall score (ABCDE) is attributed to help you easily identify the products with the best environmental performance by comparing products of the same type with one another (T-shirts, pants, backpacks, etc.).
Decathlon chose to apply this voluntary environmental labeling system.
For more information, visit: http://sustainability.decathlon.com/

Composition

Main fabric : 79.0% Polyamide, Main fabric : 21.0% Polyester cationic
Hood : 100.0% Polyester cationic
Main lining : 100.0% Polyester cationic
Secondary lining : 100.0% Polyamide
Yoke : 94.0% Polyamide, Yoke : 6.0% Polyester cationic
Membrane/coating : 100.0% Polyurethane
Wristband : 76.0% Polyester cationic, Wristband : 24.0% Spandex

Waterproof : Approved under a simulated rain storm (450 L/sqm/hr) for 24 hours (3 x 8 hours)

Breathability : 3-layer breathable laminated fabric (RET < 20)

Pockets : 5 secure pockets including 2 handwarmer pockets and 1 storm pocket.

Abrasion resistant : Reinforced jacket hem