Wholesale 🔥 Tribord Sailing Men’s Boat Regatta Anorak Race 500 😉

This waterproof sailing anorak is ideal for maneuvering on board and staying dry. Its technology keeps the sailor protected from the elements so they can concentrate on sailing on any kind of boat!

These overalls were designed by our sailing team to protect you from the elements of sea and heavy rain during training as well as during regattas.

WATERPROOFING

– Membraned 2-layer fabric
– A strong rain corresponds to a flow of 100 L/m2/h – (= rainfall of 100 mm/h)
– The rainfall simulator reproduces these conditions for 3 hours.
– Component resistant to water pressure of 5000 mm after aging = 5000 Schmerber – average pressure of water during a downpour

– Water-repellent components allows water to runs off the fabric.
– 100% taped seams.
– Central opening features a flap with a drainage channel for optimal waterproofing

BREATHABILITY

RET <12: very breathable.

To find out whether a fabric is breathable, we measure its evaporative resistance, or RET, (test based on the ISO 11092 standard). It is its ability to allow the water vapor produced by the body during exercise to escape.

COMFORT

3-way adjustable hood.
Adjustable jacket hem.

Reflective patches

2 shoulder patches
2 hood patches
to intensify light sources.

RESISTANCE TO WEAR

Injected plastic central zipper resistant to salt oxidation.

HOW TO REACTIVATE THE JACKET’S WATER REPELLENCY
step 1: before washing

Close all zippers and flaps and remove any parts of the garment that cannot be washed. Also remember to loosen the straps and elastic parts and empty the pockets.
Then turn the garment inside out to wash it.

HOW TO REACTIVATE THE JACKET’S WATER REPELLENCY
step 2: washing

You can wash your jacket on a synthetic cycle at 86°F or 104°F with your usual detergent. Do not use fabric softener, which could damage the existing performance of the garment, or bleach.

Also take care not to bend your jacket too much when you place it in the washing machine and do not overload your machine.

Very important: select a thorough rinse or double rinse to completely remove all detergent residue.

HOW TO REACTIVATE THE JACKET’S WATER REPELLENCY
step 3: drying

Drying is a crucial phase in reactivating the water-repellent treatment.
We recommend that you lay your jacket flat on a clothes rack and leave it out to dry in the open. Caution: never dry your jacket directly on a radiator.

Then place it in the tumble dryer on a short synthetics cycle, i.e. 10 to 15 minutes, before turning it back the right way around.

HOW TO REACTIVATE THE JACKET’S WATER REPELLENCY

If, despite this procedure of washing and thorough rinsing followed by gentle drying in a tumble dryer, the drops of water no longer run off the surface of your jacket, we recommend that you “re-waterproof” it using a spray sold in our stores.

Score to compare the environmental impact of products

The environmental impact of the product is calculated over its entire lifecycle and with different indicators. An overall score (ABCDE) is attributed to help you easily identify the products with the best environmental performance by comparing products of the same type with one another (T-shirts, pants, backpacks, etc.).
Decathlon chose to apply this voluntary environmental labeling scheme. For more information, visit: http://sustainability.decathlon.com/

Composition

Main fabric : 100.0% Polyamide
Main lining : 100.0% Polyamide
Secondary lining : 100.0% Polyester cationic
Membrane/coating : 100.0% Polyurethane
Wristband : 84.0% Polyester cationic, Wristband : 16.0% Spandex

Waterproof : 4 hr in the rain (>8000 mm, 450 L/m²/h). Fully taped seams. Water-repellent.

Breathability : Very breathable 2-layer fabric (RET < 12).

Salt water resistant : Injected plastic zipper.

Pockets : 4 secure pockets. (2 inner and 2 outer).

Easy to use : 3-way adjustable hood built into the collar. Tightens at waist and cuffs.

Environmental impact : NOTE D – Comparison: men’s waterproof jacket – detailed technical information